Thursday, June 2, 2011
Approx how much should it cost to get front brakes changed on an 98 Chevy metro. The pads were 15 dollars.?
I bought the brake pads and changed them for my dad and he wants to compensate me the price he would have paid a mechanic.Approx how much should it cost to get front brakes changed on an 98 Chevy metro. The pads were 15 dollars.?it depends on who puts them on.Approx how much should it cost to get front brakes changed on an 98 Chevy metro. The pads were 15 dollars.?most mechanics charge 40 dollars an hour but unless you really need the money tell him happy fathers day and tell him not to worry about itApprox how much should it cost to get front brakes changed on an 98 Chevy metro. The pads were 15 dollars.?Any mechanic charges for parts plus tax then adds $40-50 an hour. At least thats my experience. So, if you know how long it took you to fix you can add it up.
How to change the brakes on 01' Chevy Lumina?
I'm need to change just the front brake pads on a 2001 Chevy Lumina, and I have now idea what I'm doing so I'm asking for your guidance.
If you have any website links that you think would be helpful please post.
Thanks in advance!How to change the brakes on 01' Chevy Lumina?1.put a piece of wood under the rear tire, %26lt;will prevent car from rolling back%26gt; 2.open the hood remove the cap on the master cylinder if low on oil do not refill, low fluid is a indication or worn out brakes since its a sealed system unless there is a leak you should never have to replace fluid.3.jack up front end either as a whole or one side at a time use a jack stand under the frame rail, lower car onto jack stand.4. pull the wheel off.5 loosen the caliper bolts normally this is a large hex bolt
remove calipers remove pads look at old pads for un even wear or burns
or cracks indication for bad calipers should be even wear on both pads
check the rotor which is what the wheel bolts too, look for blue-ing
or small cracks grooves etc if you find any replace the caliper or have them turned at a machine shop average price in my state 25 dollars a wheel some times and some places are cheaper to buy new ones get a can of brake cleaner at a parts store you'll need to use specific cleaners other wise there might be a residue and you won't stop,6 get a rag and large pair of channel locks put rag over piston in caliper slowly compress with the master cylinder cap off this should be easy
you do not need to bleed brakes that's only when you crack open a Zerk fitting and we haven't done that here, once piston is compressed all the way into the caliper your ready for new pads, first go wash your hands grease is a brake system worst nightmare most disk brakes come with a little tube of glue called anti chatter glue this is applied to the back of the pads let that sit a minute to set then install the new pads carefully put caliper back onto rotor and re bolt down do a visual check to make sure you did not disconnect anything else.
then put the wheel back on that side is done do the same for the other wheel. with all that said and done now you know how to change the brakes on every car with disk brakes they are all the same type system the only thing that varies is to bolts holding the calipers
and the calipers themselves rotors are rotors all the same, with that being done pretty simple kind of makes you wonder why it costs 400 dollars to do a brake job.
hope this helps
LrHow to change the brakes on 01' Chevy Lumina?You should be able to go to AUTOZONE.COM and find a repair manual online that will show diagrams for your vehicle. If not you can go to your local parts store and they will probably have a repair manual for your carHow to change the brakes on 01' Chevy Lumina?all you need to do is pull the tire off, take a c-clamp and push the caliper piston in, take out 2 bolts and lift the caliper off. change the pads and install the caliper and tighten the bolts. make sure you pump the brakes up after you get done.
If you have any website links that you think would be helpful please post.
Thanks in advance!How to change the brakes on 01' Chevy Lumina?1.put a piece of wood under the rear tire, %26lt;will prevent car from rolling back%26gt; 2.open the hood remove the cap on the master cylinder if low on oil do not refill, low fluid is a indication or worn out brakes since its a sealed system unless there is a leak you should never have to replace fluid.3.jack up front end either as a whole or one side at a time use a jack stand under the frame rail, lower car onto jack stand.4. pull the wheel off.5 loosen the caliper bolts normally this is a large hex bolt
remove calipers remove pads look at old pads for un even wear or burns
or cracks indication for bad calipers should be even wear on both pads
check the rotor which is what the wheel bolts too, look for blue-ing
or small cracks grooves etc if you find any replace the caliper or have them turned at a machine shop average price in my state 25 dollars a wheel some times and some places are cheaper to buy new ones get a can of brake cleaner at a parts store you'll need to use specific cleaners other wise there might be a residue and you won't stop,6 get a rag and large pair of channel locks put rag over piston in caliper slowly compress with the master cylinder cap off this should be easy
you do not need to bleed brakes that's only when you crack open a Zerk fitting and we haven't done that here, once piston is compressed all the way into the caliper your ready for new pads, first go wash your hands grease is a brake system worst nightmare most disk brakes come with a little tube of glue called anti chatter glue this is applied to the back of the pads let that sit a minute to set then install the new pads carefully put caliper back onto rotor and re bolt down do a visual check to make sure you did not disconnect anything else.
then put the wheel back on that side is done do the same for the other wheel. with all that said and done now you know how to change the brakes on every car with disk brakes they are all the same type system the only thing that varies is to bolts holding the calipers
and the calipers themselves rotors are rotors all the same, with that being done pretty simple kind of makes you wonder why it costs 400 dollars to do a brake job.
hope this helps
LrHow to change the brakes on 01' Chevy Lumina?You should be able to go to AUTOZONE.COM and find a repair manual online that will show diagrams for your vehicle. If not you can go to your local parts store and they will probably have a repair manual for your carHow to change the brakes on 01' Chevy Lumina?all you need to do is pull the tire off, take a c-clamp and push the caliper piston in, take out 2 bolts and lift the caliper off. change the pads and install the caliper and tighten the bolts. make sure you pump the brakes up after you get done.
Is It Cheaper to change my front brake pads or pay someone to do it?
Front left wheel base on car is squealing I think it needs front brakes but was wondering how hard and how much cheaper it would be to do it myself.Is It Cheaper to change my front brake pads or pay someone to do it?It's not hard, but if you have never done it, remember that your brakes are what keep you from running into other innocent people who are not too cheap to take care of THEIR brakesIs It Cheaper to change my front brake pads or pay someone to do it?It's always cheaper to do it yourself. If you know how to do it, do it yourself, it's not that time consuming or difficult.Is It Cheaper to change my front brake pads or pay someone to do it?it's not hard and it would be a lot cheaper for you to do it your selfIs It Cheaper to change my front brake pads or pay someone to do it?It's not hard to do and much cheaper to do it yourself.Is It Cheaper to change my front brake pads or pay someone to do it?you better do it yourself if you know how. it usually costs about $100 per pad if you pay a professional.Is It Cheaper to change my front brake pads or pay someone to do it?If you know what you're doing then it's way cheaper to do it yourself but if you don't take it somewhere to get it fixed... you might break something or not do it right then it'll cost you more to get it all fixed...Is It Cheaper to change my front brake pads or pay someone to do it?Do it yourself. It's not very hard (find a friend that knows a bit about cars and get them to help) it took me about an hour to an hour and a half and cost me a total of about $20 (i didn't have to do my rotors) it would have cost an easy $80 to pay someone to do it, so I made nearly $50 an hour doing the job myself.
GregIs It Cheaper to change my front brake pads or pay someone to do it?Assuming you haven't let it wear to the point that the rotors need to be resurfaced or replaced, and you have some idea of what you are doing, it's always cheaper to buy the parts and do it yourself rather than pay for the labor. Do you have the needed tools?Is It Cheaper to change my front brake pads or pay someone to do it?If you know what you are doing and have the right tools than do it yourself.Is It Cheaper to change my front brake pads or pay someone to do it?If you know how to do it, it's cheaper to do it yourself. If you don't, your life, and the lives of other could hang in the balance. The extra $200 max just isn't worth that.Is It Cheaper to change my front brake pads or pay someone to do it?Probably the easiest job on a car.Is It Cheaper to change my front brake pads or pay someone to do it?From the stand point of brakes and pads it's cheaper to do it yourself if you know what you are doing. Changing brakes is a relatively easy job, but you have to look at your initial start up costs.
1. Need a good set of Jack Stands! Never work on a vehicle that is off the ground with out them! $20
2. Good set of tools. Don't get cheap tools, they only lend themselves to hurting yourself. You can get an inexpensive Craftsman ratchet and socket set at Sears for $50
3. A large C-Clamp. Again I go with craftsman. $30
4. I like having a hydraulic jack, but you can use the jack that comes with the car. $25.
5. Brake Pads typically $20-$30 (Get the lifetime wear warranty ones from autozone and it will be the last set of pads you purchase if you don't go metal to metal. They don't honor the warranty if you go metal to metal)
6. I would advise turning the rotors at a machine shop or auto parts store. Typically $20 ($10 per rotor is pretty standard)
So your initial start up costs is approximately for the first brake job. $175
Each additional time you do the brakes on that vehicle yourself will cost you only $20 (the cost to get the rotors turned).
Can definitely save you money in the long run!
However if you don't know what you are doing. Killing your self in an accident or hitting something/someone is never worth it.Is It Cheaper to change my front brake pads or pay someone to do it?Doing anything yourself is always a tradeoff. Yes, it's probably less expensive, tho not as much as you might expect. That's not figuring in your time. A mechanic can probably do the job in under an hour. How much time are you willing to spend? If you've never done it before, it might take you an entire day.
Then too, there's the cost of tools if you don't have the proper ones for your car.
And, there's the issue of liability. If you do the job and don't do it properly, there's no one to blame but yourself. Your insurance company might look at it that way too if you get in an accident.
I've done it a few times and, for me, it's not worth the aggravation. Of course, if you like to work on cars, that's another consideration.Is It Cheaper to change my front brake pads or pay someone to do it?...and you magically have a brake lathe hiding around in your garage to turn your rotors?? go to a repair shop! if your brakes fail because you wanted to save $20, it's not just you you're endangering... it's everyone else on the road as well. good luck!Is It Cheaper to change my front brake pads or pay someone to do it?I agree with all on the opinion that it is cheaper to do your self if you have the tools and knowledge. However being a certified mechanic, I advise you to take it to a repair shop or a person who knows what to do. There is much more to a brake system than just swapping pads and having the rotors machined. If you have an ABS system, it could get damaged if you don't do it right. I have seen several minor $150 brake jobs turn into $500-$2000 jobs because of not doing it correctly.cheapest web hosting get away with cheating
GregIs It Cheaper to change my front brake pads or pay someone to do it?Assuming you haven't let it wear to the point that the rotors need to be resurfaced or replaced, and you have some idea of what you are doing, it's always cheaper to buy the parts and do it yourself rather than pay for the labor. Do you have the needed tools?Is It Cheaper to change my front brake pads or pay someone to do it?If you know what you are doing and have the right tools than do it yourself.Is It Cheaper to change my front brake pads or pay someone to do it?If you know how to do it, it's cheaper to do it yourself. If you don't, your life, and the lives of other could hang in the balance. The extra $200 max just isn't worth that.Is It Cheaper to change my front brake pads or pay someone to do it?Probably the easiest job on a car.Is It Cheaper to change my front brake pads or pay someone to do it?From the stand point of brakes and pads it's cheaper to do it yourself if you know what you are doing. Changing brakes is a relatively easy job, but you have to look at your initial start up costs.
1. Need a good set of Jack Stands! Never work on a vehicle that is off the ground with out them! $20
2. Good set of tools. Don't get cheap tools, they only lend themselves to hurting yourself. You can get an inexpensive Craftsman ratchet and socket set at Sears for $50
3. A large C-Clamp. Again I go with craftsman. $30
4. I like having a hydraulic jack, but you can use the jack that comes with the car. $25.
5. Brake Pads typically $20-$30 (Get the lifetime wear warranty ones from autozone and it will be the last set of pads you purchase if you don't go metal to metal. They don't honor the warranty if you go metal to metal)
6. I would advise turning the rotors at a machine shop or auto parts store. Typically $20 ($10 per rotor is pretty standard)
So your initial start up costs is approximately for the first brake job. $175
Each additional time you do the brakes on that vehicle yourself will cost you only $20 (the cost to get the rotors turned).
Can definitely save you money in the long run!
However if you don't know what you are doing. Killing your self in an accident or hitting something/someone is never worth it.Is It Cheaper to change my front brake pads or pay someone to do it?Doing anything yourself is always a tradeoff. Yes, it's probably less expensive, tho not as much as you might expect. That's not figuring in your time. A mechanic can probably do the job in under an hour. How much time are you willing to spend? If you've never done it before, it might take you an entire day.
Then too, there's the cost of tools if you don't have the proper ones for your car.
And, there's the issue of liability. If you do the job and don't do it properly, there's no one to blame but yourself. Your insurance company might look at it that way too if you get in an accident.
I've done it a few times and, for me, it's not worth the aggravation. Of course, if you like to work on cars, that's another consideration.Is It Cheaper to change my front brake pads or pay someone to do it?...and you magically have a brake lathe hiding around in your garage to turn your rotors?? go to a repair shop! if your brakes fail because you wanted to save $20, it's not just you you're endangering... it's everyone else on the road as well. good luck!Is It Cheaper to change my front brake pads or pay someone to do it?I agree with all on the opinion that it is cheaper to do your self if you have the tools and knowledge. However being a certified mechanic, I advise you to take it to a repair shop or a person who knows what to do. There is much more to a brake system than just swapping pads and having the rotors machined. If you have an ABS system, it could get damaged if you don't do it right. I have seen several minor $150 brake jobs turn into $500-$2000 jobs because of not doing it correctly.
How to change cs camry 1989 front brakes??
any idea of how to change brake pads on this type of car?How to change cs camry 1989 front brakes??front brake pads are the easiest to do. I simply jack it up put stands in place for safety. pull the wheels, install a 5/16's vacuum hose on the bleader nipple put the other end of the hose in a clear glass container with aprx 1/3 full of brake fluid in the bottom . then i open the bleader valve and gently compress the pad s toward the inside to free up the calipers from the rotors. I close the valve , remove the bolts holding the caliper to the support arms, remove the caliper and tie it up to keep it secured and not pulling on the flex line. the pads are held in by spring metal clips ans simply slip away from the rotor direction the face. now I use an old brake pad against the caliper piston and I use a clamp , open that bleeder valve again and cmpress the pistons till they are flush to the caliper housing. I examine the rotors for ridges but prefer to turn them for at least a clean up 10 thousand's. this insure smooth stopping. install the new pads with disc quiet applied to the backs of the pads where the dirt was not on the old pads and a little anti seaze where the pads set on the spring metal. reinstall the calipers and torque the bolts that hold the caliper on. top the fluid in the master and blead the brakes starting on the wheel furthest from the master (passenger side front) then the drivers front. if done right you have good smooth brakes. if wrong you have spoungy brakes.How to change cs camry 1989 front brakes??http://www.autozone.com/az/cds/en_us/090
try this
try this
Any good websites that teach you how to change drum brakes?
I'm pretty good at changing rotors and front brakes but I've never bothered with the drums. There are plenty of sites that teach you how to do the front brakes, what about drum brakes?
Do you need special tools to do this job or any special knowledge?Any good websites that teach you how to change drum brakes?Try here:
http://autorepair.about.com/cs/doityours
good luckAny good websites that teach you how to change drum brakes?using jack stands get both drums off. this is sometimes the hardest part. then do one side at a time so you can look at the other side to see how it goes when you can't remember. After the drums are off it is a 2 minute job on some cars, 2 hour on others. Brake spring tools are nice to have but not necessary. Check the hydraulic cylinders as they are prone to leaking when new shoes are installed. They are pushed back up into their bore where rust will be if the car is old and water has made it into the brake fluid. Do not try to get by without having the drums turned or replaced unless you really didn't care about the brakes anyway.Any good websites that teach you how to change drum brakes?drums are a pain in the ***...but they at the same time are simple its just a matter of remembering where the springs and adjusting the adjuster right. just remember how you took them off and youll be fine putting them back on..there isnt really a universal way to take them off because all drum setups are different...just take a picture when you take the drum off so you can see how they went or do 1 side at a time and youll be able to see how the other side wentAny good websites that teach you how to change drum brakes?SAME IDEA AS FRONT. JUST REMEMBER TO LEAVE E BRAKE OFF. There is an adjustment on the inside of the drum you acces through a hole on the side to loosen your shoes. Its pretty much a gear . I just use a screwdriver to turn it until it frees up the drums. sometimes ya gotta bang on drums to get them offAny good websites that teach you how to change drum brakes?Best to get a manual as there are specific needs for serviceing emergency barkes (attachec) and adkusting them that make them more complicated than disc brakes...and you may need some spring tools and an adjusting toolAny good websites that teach you how to change drum brakes?Been a while since i've done a drum but easy enough, just make sure the cylinder is not leaking when you put it back together.Any good websites that teach you how to change drum brakes?znet.com supported by autozone and alldata repiar servicesAny good websites that teach you how to change drum brakes?What kind of vehicle do you own? I think Autozone.com has step by step directions with pictures.
-Olivia
OH and DO NOT step on the brake pedal with the drum off!! You will blow out your wheel cylinders lol
Do you need special tools to do this job or any special knowledge?Any good websites that teach you how to change drum brakes?Try here:
http://autorepair.about.com/cs/doityours
good luckAny good websites that teach you how to change drum brakes?using jack stands get both drums off. this is sometimes the hardest part. then do one side at a time so you can look at the other side to see how it goes when you can't remember. After the drums are off it is a 2 minute job on some cars, 2 hour on others. Brake spring tools are nice to have but not necessary. Check the hydraulic cylinders as they are prone to leaking when new shoes are installed. They are pushed back up into their bore where rust will be if the car is old and water has made it into the brake fluid. Do not try to get by without having the drums turned or replaced unless you really didn't care about the brakes anyway.Any good websites that teach you how to change drum brakes?drums are a pain in the ***...but they at the same time are simple its just a matter of remembering where the springs and adjusting the adjuster right. just remember how you took them off and youll be fine putting them back on..there isnt really a universal way to take them off because all drum setups are different...just take a picture when you take the drum off so you can see how they went or do 1 side at a time and youll be able to see how the other side wentAny good websites that teach you how to change drum brakes?SAME IDEA AS FRONT. JUST REMEMBER TO LEAVE E BRAKE OFF. There is an adjustment on the inside of the drum you acces through a hole on the side to loosen your shoes. Its pretty much a gear . I just use a screwdriver to turn it until it frees up the drums. sometimes ya gotta bang on drums to get them offAny good websites that teach you how to change drum brakes?Best to get a manual as there are specific needs for serviceing emergency barkes (attachec) and adkusting them that make them more complicated than disc brakes...and you may need some spring tools and an adjusting toolAny good websites that teach you how to change drum brakes?Been a while since i've done a drum but easy enough, just make sure the cylinder is not leaking when you put it back together.Any good websites that teach you how to change drum brakes?znet.com supported by autozone and alldata repiar servicesAny good websites that teach you how to change drum brakes?What kind of vehicle do you own? I think Autozone.com has step by step directions with pictures.
-Olivia
OH and DO NOT step on the brake pedal with the drum off!! You will blow out your wheel cylinders lol
How do I change the front brake pads on a 2003 dodge ram 2500 2wd truck w a 5.7l engine?
looking for info on how to change the front (rear too !)brake pads on my 2003 dodge 2500 ram 2wd truck w 5.7L engine.
Also, my radio stopped working completely the fuses are fine how would i test the amp or replace it if necessary?How do I change the front brake pads on a 2003 dodge ram 2500 2wd truck w a 5.7l engine?Changing breaks is simple. Please read this in it entirety before trying.
First you need to assess if you have warped rotors. If while breaking the vehicle surges under the pressure of the standard breaking not hard breaking then you have a warped rotor. You have to either remove them and take them to a local shop and have them turned or replace them all together. If you have one warped rotor it is best to have them both turned as pinpointing which one is warped is next to impossible.
Buy a Break Piston Compressor from your local Automobile Shop. Provided a link on what it looks like. While you are there buy the pads. You will want to get the premium or ceramic pads as they will last longer.
Now be prepared to get dirty.
Let the vehicle set for one hour if you just came back from the shop to have the breaks cooled down properly.
Open the hood and loosen the cap for the break reservoir. Do not add more fluid at this time. While performing this break replacement break fluid may spill out so loosely wrapping a rag around the break reservoir will catch most of it. DO NOT REUSE THE FLUID YOU CATCH AND PUT BACK IN THE SYSTEM.
Jack up the vehicle and place a jack stand under the control arm. That is for safety in case the jack fails.
Remove the tire and set aside.
Locate the caliper with the break pads in place.
Open the box that has the new pads. Examine the pads to make sure that you purchased the correct pads by comparing them while they are still on the vehicle. Pads have a metal side and a rough material side to them. After verifying that everything looks the same remove the two bolts that are on the back of the caliper. They are not the large 15/16 bolts they are probably 10mm or 12mm bolts.
Once they are removed, remove the caliper by sliding it forward from the top to the front of the vehicle and lift up. You can set the caliper on top of the rotor while working. DO NOT REMOVE THE BREAK LINE AS DOING SO WILL REQUIRE YOU TO HAVE TO BLEED THE SYSTEM.
Remove the outer pad make note of how you take it out and how it was positioned in the caliper. You may need a screwdriver to help release the clips from the caliper. Do not bend them.
Now leaving the inner pad in place use the piston compression tool and push the piston further into its cylinder. Make sure that you place the tool in the center of the piston and apply Even pressure until it bottoms out. You will know that because you cannot turn it anymore. DO NOT OVER TIGHTEN.
Open the box that contains the new pads. Locate the Inner pad and remove the inner pad from the caliper and replace it with the new one. Now put the outer pad in place. Return the caliper to its correct position back on the the rotor assembly and insert and replace the bolts. They should be torqued to 10 to 15 ft pounds no more. All vehicles are different so you may want to ask for the torque specifications on your model from the local repair shop.
Replace the tire and perform that same steps on the other side.
After you are finished make sure to tighten the cap for the Break reservoir and close the hood. Start the vehicle and slowly pump the breaks till they feel normal. Test drive it a short distance going slow. No more than 15 mph and test the breaks again. Works great.
Now go clean up you terrible.How do I change the front brake pads on a 2003 dodge ram 2500 2wd truck w a 5.7l engine?If you dont know how to change your own brakes and have to ask on here how to change them. I would take it to a shop you dont want to mess the brakes up or anything in general in your motor.
Also, my radio stopped working completely the fuses are fine how would i test the amp or replace it if necessary?How do I change the front brake pads on a 2003 dodge ram 2500 2wd truck w a 5.7l engine?Changing breaks is simple. Please read this in it entirety before trying.
First you need to assess if you have warped rotors. If while breaking the vehicle surges under the pressure of the standard breaking not hard breaking then you have a warped rotor. You have to either remove them and take them to a local shop and have them turned or replace them all together. If you have one warped rotor it is best to have them both turned as pinpointing which one is warped is next to impossible.
Buy a Break Piston Compressor from your local Automobile Shop. Provided a link on what it looks like. While you are there buy the pads. You will want to get the premium or ceramic pads as they will last longer.
Now be prepared to get dirty.
Let the vehicle set for one hour if you just came back from the shop to have the breaks cooled down properly.
Open the hood and loosen the cap for the break reservoir. Do not add more fluid at this time. While performing this break replacement break fluid may spill out so loosely wrapping a rag around the break reservoir will catch most of it. DO NOT REUSE THE FLUID YOU CATCH AND PUT BACK IN THE SYSTEM.
Jack up the vehicle and place a jack stand under the control arm. That is for safety in case the jack fails.
Remove the tire and set aside.
Locate the caliper with the break pads in place.
Open the box that has the new pads. Examine the pads to make sure that you purchased the correct pads by comparing them while they are still on the vehicle. Pads have a metal side and a rough material side to them. After verifying that everything looks the same remove the two bolts that are on the back of the caliper. They are not the large 15/16 bolts they are probably 10mm or 12mm bolts.
Once they are removed, remove the caliper by sliding it forward from the top to the front of the vehicle and lift up. You can set the caliper on top of the rotor while working. DO NOT REMOVE THE BREAK LINE AS DOING SO WILL REQUIRE YOU TO HAVE TO BLEED THE SYSTEM.
Remove the outer pad make note of how you take it out and how it was positioned in the caliper. You may need a screwdriver to help release the clips from the caliper. Do not bend them.
Now leaving the inner pad in place use the piston compression tool and push the piston further into its cylinder. Make sure that you place the tool in the center of the piston and apply Even pressure until it bottoms out. You will know that because you cannot turn it anymore. DO NOT OVER TIGHTEN.
Open the box that contains the new pads. Locate the Inner pad and remove the inner pad from the caliper and replace it with the new one. Now put the outer pad in place. Return the caliper to its correct position back on the the rotor assembly and insert and replace the bolts. They should be torqued to 10 to 15 ft pounds no more. All vehicles are different so you may want to ask for the torque specifications on your model from the local repair shop.
Replace the tire and perform that same steps on the other side.
After you are finished make sure to tighten the cap for the Break reservoir and close the hood. Start the vehicle and slowly pump the breaks till they feel normal. Test drive it a short distance going slow. No more than 15 mph and test the breaks again. Works great.
Now go clean up you terrible.How do I change the front brake pads on a 2003 dodge ram 2500 2wd truck w a 5.7l engine?If you dont know how to change your own brakes and have to ask on here how to change them. I would take it to a shop you dont want to mess the brakes up or anything in general in your motor.
Change brakes?
i change my front brakes every30-35k, how often will i be needing to change my rear drum brakes on a 4x2 truck.Change brakes?The rear drum brakes last about twice as long.Change brakes?i dont change mine i just tighten them. they should be good for 100k as long as you tighten them.Change brakes?I have never changed or tightened rear brakes on any vehicle. 70% of your braking power comes from the front brakes, so rear brakes only need to be changed if they are completely worn out.Change brakes?When you change the front brakes, inspect the rear brakes as well for wear and cracks on the drum. Most of your stopping ability is provided by the front breaks so the rears do not get as much wear. BTW Drum brakes auto adjust by themselves.Change brakes?never trust the auto adjusters,yup shoes do usually last twice as long as front pads, and it wouldn't hurt to re-adjust them every 20,000 km it's not hard to do, you should notice your brake peddle feel better when the rear shoes are adjusted not to mention the vehicle will stop better, good luck.
Subscribe to:
Posts
(Atom)