Monday, September 19, 2011

Brakes on 05cavalier soft please help!!?

ok so i changed the front passenger brake line to the caliper because there was a hole in it. we put fluid back in the master cylinder and went to bleed brakes but they are not building up any pressure. originally when i knew i had to change the line it happened in a second because one second i had perfect brakes then the next i had none, so i am not sure how i got a hole in my brake line. just wondering why it wouldnt be building up any pressure and what i can do for it? thank you!Brakes on 05cavalier soft please help!!?make sure you start the bleed fartest from the master cylinder.also adjust the rearbrake shoes out.if you dont even after you bleed the brakes you will still have a low pedal.Brakes on 05cavalier soft please help!!?start with the right rear when bleeding... recheck your work.... and a 05 shouldnt be needing brke lines yet really so think i would bleed them best you can and drive to a shop and have it look atBrakes on 05cavalier soft please help!!?Did you bleed all of the brakes? Go to the one furthest away from the master cylinder, then go to next furthest one, etc.. You must keep adding fluid as you go. DO NOT LET master cylinder go dry or even to low.



A soft pedal denotes air in the line. If you are not sure what you are doing, have a mechanic do it. It is not worth killing some over a few bucks.Brakes on 05cavalier soft please help!!?if theres not any air coming out, just keep bleeding them, you probably got a air pocket in the lines. you get pin holes in the brake lines from rot, like road salt and water, they all go bad eventually, then you have replace them.Brakes on 05cavalier soft please help!!?if you have an abs set up. you will also have to go through that system to completely bleed the brakes.
  • better first name
  • hair straightening
  • No comments:

    Post a Comment